Same day shipping / Next day delivery
The UK's home of peelable, sprayable paint since 2012
Search Your Cart

PlastiDip Thinners

Plasti Dip® is an air-dry, specialty rubber coating. In fact, it’s the original peelable, flexible, insulating, non-slip, durable rubber coating. The Plasti Dip® product line provides a wide range of coating solutions from automotive customization to home improvement. With over 50 colours and enhancers of Plasti Dip®, the possibilities are endless!
Protects coated items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip. Remains flexible and stretchy over time. Will not crack or become brittle in extreme weather conditions. Proven in temperatures from -30°F to 200°F. Peelable and removable off of most surfaces.
These are the Matt-Pack thinners which are 100% compatible with Plasti Dip®. Made to the exact spec of Plasti Dip® USA manufacturer requirements. These are NOT simply cellulose, 2k, toluene, xylene etc. These are a PROPER blend of Toluene and Naphtha (ONLY for trade customers) or Xylene and Naphtha for normal everyday customers. These are mixed 50:50 with pure Plasti Dip® to make sprayable material.
You need 1 Litre Pure Plasti Dip® with 1 Litre thinner, 1 US gallon of pure Plasti Dip® and 1 US gallon of thinner and so on.
We tried many mixing variations with the pure Plasti Dip®, 70:30, 60:40 either way and found the 50:50 was ALWAYS a superior finish.
How To Use
Spraying Tips
How To Spray:
Spraying (aerosol)
1.            Surface must be clean and dry. For best results, avoid direct sunlight, high humidity, or breezy conditions.
2.            Shake can vigorously for one full minute after mixing ball begins to rattle. Shake often while applying.
3.            Hold can 6-10” from surface, moving can back and forth, slightly overlapping each stroke. Apply heavily enough to produce an even, wet appearance.
4.            Allow 30 minutes’ minimum between coats. Apply as many coats as desired (3-7 average).
5.            Allow 4 hours’ minimum dry time before use (overnight recommended). Coverage: Approximately 5-10 sq. ft. per can (1 coat). Generally 1 Can per wheel.
Spraying Tips:
Always protect surrounding areas from over spray. Allow 4 hours per coat for complete dry. If runs or sags are experienced, move can further away from surface. To avoid clogged nozzle, turn can upside down and spray for 5 seconds. If clogged, remove nozzle and soak in naphtha or mineral spirits for 30 minutes. Do not stick pin or other objects into stem. Use naphtha, xylene (xylol), or toluene (toluol) for clean-up. To greatly increase non-skid properties, sprinkle a generous amount of grit onto wet surface of first coat. Apply at least two additional coats of Plasti Dip. For best results, use a pumice (crystalline silica) grit. Results may vary with other grit additives. When applied properly Plasti Dip can be removed from most surfaces, if desired.
Thinner 1 US Gallon
£ 58.99
Thinners for PURE PlastiDip®
1 US Gallon
Thinner 5 Litres
£ 66.99
Thinners for PURE PlastiDip®
5 Litres
Thinner 1 Litre
£ 19.99
Thinners for PURE PlastiDip®
1 Litre