SOLID - ULTRA BLACK (BLACK HOLE)

Ultra Black (Black Hole) is a fairly popular colour. Scroll down to see all Ultra Black (Black Hole) items. Click BUY to buy an item, or click on the picture to get more information about the product.

INFO

Ultra Black (Black Hole) is a FullDip colour. It is available in the FullDip range and you can PlastiDip topcoats with it.

We recommend using a black base.

This will give a matte finish.

You can topcoat it with satin or glossifier to alter the finish. Or our PRO gloss & matte finishes to add fuel resistance.

You can make this metallic by simply adding the 'Metallic Maker' (see bottom).

APPLICATION

2 light dust coats of spraywrap black.

2-3 wet coats black.

Then at least 3 or 4 full wet coats of the Ultra Black (Black Hole) 

EQUIPMENT

Earlex HV2901, MS3000, FullDip FD650 or usual compressor setup 1.7-2.0 tip at 20-28 PSI and the TSS ProHSE.

Remember on compressors, the higher the PSI, the more you waste as it floats away in the air. Yes it will be smooth, but difficult to peel as most will be on the floor. So try to go as low as possible. We find great results vs waste at about 25 PSI.

Unfortunately there are no aerosols for this colour yet.

Sprayable

This is a FullDip colour, comes in 4L tin.

Starter Kits

Order the correct kit in these stages;

Decide the size needed (email us) B, C or D.

Choose the gun.

Choose the finish.

FullDip®