Nato Grey / Green is a fairly popular colour. Scroll down to see all Nato Grey / Green items. Click BUY to buy an item, or click on the picture to get more information about the product.
INFO
Nato Grey / Green is a Matt-Pack colour. It is available in the FullDip range and PlastiDip range.
We recommend using the grey primer base.
This will give a matte finish.
You can topcoat it with satin or glossifier to alter the finish. Or our PRO gloss & matte finishes to add fuel resistance.
You can make this metallic by simply adding the 'Metallic Maker' (see bottom).
APPLICATION
2 light dust coats of spraywrap primer grey.
2-3 wet coats primer grey.
Then at least 3 or 4 full wet coats of the Nato Grey / Green
EQUIPMENT
Earlex HV2901, MS3000, FullDip FD650 or usual compressor setup 1.7-2.0 tip at 20-28 PSI and the TSS ProHSE.
Remember on compressors, the higher the PSI, the more you waste as it floats away in the air. Yes it will be smooth, but difficult to peel as most will be on the floor. So try to go as low as possible. We find great results vs waste at about 25 PSI.
Sprayable
This is a Matt-Pack colour, can also be made into a FullDip and PlastiDip sprayable.
Tinters / Drop-Ins
No measuring needed, simply pour the contents of the tinter into a CLEAR FullDip 4 litre, 1 US Gallon of CLEAR PDS or a 5 litre PlastiDip CLEAR mix.
Make sure shake well and you get ALL the colourant out. Sometimes pigment settles and clumps at the bottom
You can add to another colour, but they are designed for a CLEAR
Instructions and video here;
https://www.facebook.com/mattpackltd/videos/1349095861790721/
https://www.facebook.com/mattpackltd/videos/1145169222183387/
Starter Kits
Order the correct kit in these stages;
Decide the size needed (email us) B, C or D.
Choose the gun.
Choose the finish.
Matt-Pack Nato Grey / Green is not available in aerosols yet.
