Camo Green is a fairly popular colour. Scroll down to see all Camo Green items. Click BUY to buy an item, or click on the picture to get more information about the product.
Camo Green is a PlastiDip colour. It is available in the FullDip range and PlastiDip range.
We recommend using the grey primer base.
This will give a matte finish.
You can topcoat it with satin or glossifier to alter the finish. Or our PRO gloss & matte finishes to add fuel resistance.
You can make this metallic by simply adding the 'Metallic Maker' (see bottom).
2 light dust coats of spraywrap primer grey.
2-3 wet coats primer grey.
Then at least 3 or 4 full wet coats of the Camo Green.
Earlex HV2901, MS3000, FullDip FD650 or usual compressor setup 1.7-2.0 tip at 20-28 PSI and the TSS ProHSE.
Remember on compressors, the higher the PSI, the more you waste as it floats away in the air. Yes it will be smooth, but difficult to peel as most will be on the floor. So try to go as low as possible. We find great results vs waste at about 25 PSI.
Self explanetory, shake and spray.
This is a PlastiDip colour and available in PlastiDip aerosols.
Plastidip® aeros 100% need warming. We also recommend you do with the FullDip aerosols too.
Its a good habit to get into with ANY aerosol. tbh
This is a PlastiDip colour, can also be made into a FullDip sprayable.
Tinters / Drop-Ins
No measuring needed, simply pour the contents of the tinter into a CLEAR FullDip 4 litre, 1 US Gallon of CLEAR PDS or a 5 litre PlastiDip CLEAR mix.
Make sure shake well and you get ALL the colourant out. Sometimes pigment settles and clumps at the bottom
You can add to another colour, but they are designed for a CLEAR
Instructions and video here;
Will give you the base colour and colour to acheive the requested (shown above) colour.
Come in a matte or gloss finish
See our wheel kit explanation HERE
These kits will usually do upto a set of 19" front faces perfectly.
Order the correct kit in these stages;
Decide the size needed (email us) B, C or D.
Choose the gun.
Choose the finish.