SOLID - BLACK   FullDip Matte Black (shown). ALL colours are MATTE as standard.  FullDip Black (shown). PLUS gloss topcoat (FullDip PRO Gloss shown). Black is a very popular colour. Scroll down to see all Black items. Click BUY to buy an item, or click on the picture to get more information about the product. INFO Black is a FullDip colour. It is available in the FullDip range and PlastiDip range. We recommend using a black base. This will give a matte finish. You can topcoat it with satin or glossifier to alter the finish. Or our PRO gloss & matte finishes to add fuel resistance. You can make this metallic by simply adding the 'Metallic Maker' (see bottom). APPLICATION 2 light dust coats of spraywrap black. 2-3 wet coats black. Then at least 3 or 4 full wet coats of the Black EQUIPMENT Earlex HV2901, MS3000, FullDip FD650 or usual compressor setup 1.7-2.0 tip at 20-28 PSI and the TSS ProHSE. Remember on compressors, the higher the PSI, the more you waste as it floats away in the air. Yes it will be smooth, but difficult to peel as most will be on the floor. So try to go as low as possible. We find great results vs waste at about 25 PSI. Aerosols Self explanetory, shake and spray. This is a FullDip colour and available in FullDip aerosols. Plastidip® aeros 100% need warming. We also recommend you do with the FullDip aerosols too. Its a good habit to get into with ANY aerosol. tbh Sprayable This is a FullDip colour, can also be made into a PlastiDip sprayable. Tinters / Drop-Ins No measuring needed, simply pour the contents of the tinter into a CLEAR FullDip 4 litre, 1 US Gallon of CLEAR PDS or a 5 litre PlastiDip CLEAR mix. Make sure shake well and you get ALL the colourant out. Sometimes pigment settles and clumps at the bottom You can add to another colour, but they are designed for a CLEAR Instructions and video here; https://www.facebook.com/mattpackltd/videos/1349095861790721/ https://www.facebook.com/mattpackltd/videos/1145169222183387/ Wheel Kits Will give you the base colour and colour to acheive the requested (shown above) colour. Come in a matte or gloss finish See our wheel kit explanation HERE These kits will usually do upto a set of 19" front faces perfectly. Starter Kits Order the correct kit in these stages; Decide the size needed (email us) B, C or D. Choose the gun. Choose the finish. FullDip® This is a FullDip colour.To make a FullDip 4 litre Sprayable, get 1 of the each below PlastiDip® Get each of these to make a PlastiDip sprayable; Wheel Kits Wheel kits upto 19" (front face) you would require 5x Black To make glossy add 1-2 of these; Rememeber to leave the above dip 24 hours to cure properly! Starter Kits SIZE B 2 x 4L BLACK SIZE C 3 x 4L BLACK SIZE D 4 x 4L BLACK Then choose your gun if you need one; ALL dip is matte finish, if you want to make shiny, add some of these as a topcoat A or B use 1 C or D use 2 For a Satin finish, use the kits below. Full instructions and use in the product description Or for a PRO, fuel resistant topcoat (requires professional compressor setup and professional equipment) NOT compatible with turbine setups. NOT designed as a DIY product. A & B use 1 C use 1.5 D use 2 Miscellaneous - Suggested Addons |
