Err

Same day shipping / Next day delivery
The UK's home of peelable, sprayable paint since 2012

METALLIC PINK

FullDip Metallic Matte Pink (FullDip shown).

ALL colours are MATTE as standard.

FullDip Metallic Matte Pink (FullDip shown).

PLUS gloss topcoat (FullDip Super Gloss shown).

Scroll down to see all Metallic Pink items. Click BUY to buy an item, or click on the picture to get more information about the product.

INFO

Metallic Pink is an easy colour. And fairly easy for first time dips.

We recommend a grey primer base.

This will give a matte finish as standard.

You can topcoat it with satin or glossifier to alter the finish. Or our PRO gloss & matte finishes to add fuel resistance.

** Be careful with the metallic maker on this colour **

** Mix it a little at a time. Too much metallic and you can make this a very pale orange, almost a silvery / pink colour **

*** We recommend using this in a satin / gloss topcoat. To make the metallic flake really pop and visible ***

APPLICATION

2 light dust coats grey primer.

2-3 wet coats grey primer

Then at least 4-5 full wet coats.

EQUIPMENT

Earlex HV2901, MS3000, FullDip FD650 or usual compressor setup 1.7-2.0 tip at 20-28 PSI

Remember on compressors, the higher the PSI, the more you waste as it floats away in the air. Yes it will be smooth, but difficult to peel as most will be on the floor. So try to go as low as possible. We find great results vs waste at about 25 PSI

Aerosols

Self explanetory, shake and spray.

FullDip cans are 400ml. PlastiDip cans show as 311gr - USA measurement (but are identical size to a 400ml aerosol)

Genuine USA aerosol?

https://youtu.be/iKnOphdvbQQ

Plastidip® aeros need warming.

https://youtu.be/6Mmo3-DNPCc

Fulldip cans do not, but its a good habit to get into with any aerosol.

Sprayable

Fulldip 4 litre and Plastidip 1 US Gallon PDS. Ready to go, shake, stir and pour into hopper and start spraying :)

Tinters / Drop-Ins

No measuring needed, simply pour the contents of the tinter into a CLEAR FullDip 4 litre or 1 US Gallon of PDS.

Then add the 'Metallic Maker' at the bottom. If you do not add the metallic maker, it will be a solid colour. You can adjust the metallic effect by adding a little of it at a time and mixing. Its quite strong, and on lighter colours we recommend not using it all. You can turn the red for instance a little pinker because it also lightens it.

Make sure shake well and you get ALL the colourant out. Sometimes pigment settles and clumps at the bottom

You can add to another colour, but they are designed for a CLEAR

Instructions and video HERE

Wheel Kits

Will give you the base colour and colour to acheive the requested (shown above) colour.

Come in a matte or gloss finish

See our wheel kit explanation HERE

These kits will usually do upto a set of 19" front faces perfectly.

Starter Kits

Order the correct kit in these stages;

Get the correct size for your car (email us if required)

The kit comes with a FullDip FD650. Upgrade gun to an Earlex HV2901 or and MS3000 (you can choose once you add a kit to the cart)

Add a PRO addon kit if required.

Add some Glossifier to make shiny.

FullDip

To make this colour in 4 Litre sprayable format, you need these 3 items, mix them all together, no measuring needed;

Wheel Kits

PlastiDip®

To make this colour in 1 US Gallon sprayable format, you need these 3 items, mix them all together, no measuring needed;

For all others simply add ONE metallic maker for each sprayable gallon / 5 litre and mix;

Starter Kits

Miscellaneous