METALLIC BLACK   FullDip Metallic Matte Black (FullDip shown). ALL colours are MATTE as standard.  FullDip Metallic Matte Black (FullDip shown). PLUS gloss topcoat (FullDip Super Gloss shown). Metallic Black is a popular colour. Scroll down to see all Metallic BLACK items. Click BUY to buy an item, or click on the picture to get more information about the product. INFO Metallic Black is really easy colour. And easy for first time dips. Will cover anything. This will give a matte finish as standard. You can topcoat it with satin or glossifier to alter the finish. Or our PRO gloss & matte finishes to add fuel resistance. *** We recommend using this in a satin / gloss topcoat. To make the metallic flake really pop and visible *** APPLICATION 2 light dust coats. Then at least 4-5 full wet coats. EQUIPMENT Earlex HV2901, MS3000, FullDip FD650 or usual compressor setup 1.7-2.0 tip at 20-28 PSI Remember on compressors, the higher the PSI, the more you waste as it floats away in the air. Yes it will be smooth, but difficult to peel as most will be on the floor. So try to go as low as possible. We find great results vs waste at about 25 PSI Aerosols Self explanetory, shake and spray. FullDip cans are 400ml. PlastiDip cans show as 311gr - USA measurement (but are identical size to a 400ml aerosol) Genuine USA aerosol? Plastidip® aeros need warming. Fulldip cans do not, but its a good habit to get into with any aerosol. Sprayable Fulldip 4 litre and Plastidip 1 US Gallon PDS. Ready to go, shake, stir and pour into hopper and start spraying :) Tinters / Drop-Ins No measuring needed, simply pour the contents of the tinter into a CLEAR FullDip 4 litre or 1 US Gallon of PDS. Then add the 'Metallic Maker' at the bottom. If you do not add the metallic maker, it will be a solid colour. You can adjust the metallic effect by adding a little of it at a time and mixing. Its quite strong, and on lighter colours we recommend not using it all. You can turn the red for instance a little pinker because it also lightens it. Make sure shake well and you get ALL the colourant out. Sometimes pigment settles and clumps at the bottom You can add to another colour, but they are designed for a CLEAR Instructions and video HERE Wheel Kits Will give you the base colour and colour to acheive the requested (shown above) colour. Come in a matte or gloss finish See our wheel kit explanation HERE These kits will usually do upto a set of 19" front faces perfectly. Starter Kits Order the correct kit in these stages; Get the correct size for your car (email us if required) The kit comes with a FullDip FD650. Upgrade gun to an Earlex HV2901 or and MS3000 (you can choose once you add a kit to the cart) Add a PRO addon kit if required. Add some Glossifier to make shiny. FullDip Wheel Kits PlastiDip® Starter Kits Elastiwrap Miscellaneous |
