BLACKINFO Black is by far the easiest colour. And recommended for first time dips. Will cover anything. Generally used as a base for most pearls, chameleons and custom colours. This will give a matte finish. You can topcoat it with satin or glossifier to alter the finish. Or our PRO gloss & matte finishes to add fuel resistance Application 2 light dust coats. Then at least 5 full wet coats if using FullDip 7 wet coats if using PlastiDip EQUIPMENT Recomended gun? Earlex HV2901, MS3000, FullDip FD650 or usual compressor setup 1.7-2.0 tip at 15-28 PSI Remember on compressors, the higher the PSI, the more you waste as it floats away in the air. Yes it will be smooth, but difficult to peel as most will be on the floor. So try to go as low as possible. We find great results vs waste at about 20 PSI |